Menu
(908) 628-1070
Double chin fat can be extremely frustrating to get rid of. No matter how much diet and exercise, there’s still some unwanted fat underneath the chin that makes people self-conscious about their appearance. But instead of trying plastic surgery for the submental area, you might want to try CoolSculpting chin treatments first.
So how does CoolSculpting for double chin work? CoolSculpting Mini is a minimally invasive fat reduction treatment that reduces submental fullness by freezing the stubborn fat cells in the treatment area. Most patients experience significant double chin reduction after multiple treatments spanning over a few weeks.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
Having a sharp chin and jawline is a beauty standard that many people hope to have. According to a survey by Allergan, about 49% of the respondents believe that the fat deposit in their submental area negatively impacts their overall appearance.
The good news is that there are lots of treatment options for people who want to get rid of chin and neck fat – such as liposuction, Kybella, and other body contouring treatments. Chin CoolSculpting is another effective cosmetic procedure that eliminates excess fat around the chin area without the need for surgery.
But before trying this fat removal procedure, patients must understand how exactly the treatment works for them first – allowing them to make the best decision for their bodies.
One interesting fact about the body is that it almost never destroys or creates new fat cells – which is why it’s difficult to get rid of unwanted fat pockets in the belly and thighs. Instead of eliminating or creating them, the body only expands or contracts the existing fat cells when people gain or lose weight.
CoolSculpting chin fat (or CoolMini treatment) uses cryolipolysis to take advantage of this fact and freeze the unwanted fat cells in the treatment area. Fat cells freeze at a higher temperature than the other tissues in the chin area, so it’s easier to alter their structure without harming the muscles or skin near them. As the fat cells get damaged, they lose the ability to maintain and gain fat – causing them to die and get flushed out of the body.
Since CoolSculpting chin treatment is a minimally invasive procedure, patients don’t require much preparation before their appointment. But during the consultation with the provider, make sure to listen to their reminders to avoid complications during and after the CoolSculpting treatment.
During the procedure, the provider uses a specially designed CoolMini applicator to pull the unwanted chin fat into the cooling cup. This CoolSculpting applicator is about 3 inches wide to fit right into the patient’s chin and achieve full coverage in the treatment area.
Once the CoolMini device is properly positioned, the doctor turns on the applicator to cool the treatment areas and freeze the fat cells. The entire treatment only takes less than an hour. Most patients agree that the CoolSculpting procedure is only slightly uncomfortable because the treatment areas eventually become numb as the skin cools.
The manufacturer of CoolSculpting claims that the treatment is safe and effective in eliminating between 20% to 80% of the fat cells in the treated area. But like any cosmetic procedure, the effectiveness of the treatment is different for everyone because of different factors.
In a 2016 study funded by the CoolSculpting manufacturer, about 77% of the participants reported a visible fat reduction in their treatment areas including the chin, thighs, abdomen, and flanks. On the other hand, a 2014 study that wasn’t sponsored by the CoolSculpting manufacturer showed that about 86% of the participants agreed that cryolipolysis was effective for them.
Most patients require multiple treatment sessions to achieve their desired CoolSculpting results. It takes a few weeks after the treatment session to see the initial results because the body takes some time to flush out the dead fat cells in the treated area.
The eliminated fat cells won’t return to the treatment areas. However, new fat cells may still develop there, so patients are advised to live a healthy lifestyle and avoid extreme weight fluctuations.
Some experts also recommend CoolSculpting Elite for their patients. This procedure is similar to the usual CoolSculpting treatments but leads to better results. It uses an applicator that covers up to 18% more surface area, bringing about quicker results in fewer treatments.
CoolSculpting double chin treatments are mostly safe, as long as they’re performed by experienced dermatologists or providers. Serious complications are extremely rare, but the patient should still be aware of the risks that come with it including:
These symptoms are common but mild, so they’re not a cause for concern. They usually disappear on their own after a few days, but make sure to contact a doctor immediately if they worsen or persist.
Paradoxical adipose hyperplasia (PAH) is an extremely rare complication of CoolSculpting treatment wherein a hard lump of fat develops in the treated area instead of going away. It occurs in about 0.0051% of the treated patients, but there isn’t a unifying risk factor among the recorded cases.
This serious complication isn’t life-threatening, but it requires a surgical procedure to get rid of the hardened fat. Patients also have to wait a few months after the development of PAH before getting liposuction to reduce the chance of PAH recurrence.
The CoolSculpting procedure is only one of the many treatment options for eliminating submental fat. Here are some of the other double chin treatments and how they compare to CoolSculpting for chin:
Chin exercises strengthen and tone the muscles and skin in the submental area. Some of the most common exercises to reshape the chin are straight jaw jut, ball exercise, pucker up, tongue stretch, bottom jaw jut, and neck stretch. There isn’t enough evidence that suggests the effectiveness of double chin exercises in eliminating submental fat. But even if there is, it still takes several months of consistent effort for patients to achieve their desired results.
Laser treatment for chin fat is similar to CoolSculpting. But instead of using extremely cold temperatures, this procedure uses heat to kill the fat cells. However, laser treatments involve creating an incision in the chin area where the laser device is inserted. CoolSculpting doesn’t require incisions, so it’s the better option for patients who want to minimize their risk of scarring.
Kybella injections contain deoxycholic acid, a naturally occurring product that breaks down dietary fat. When injected into the treatment areas on the chin, Kybella kills the fat cells by destroying their cell membrane. However, Kybella carries the risk of worsening the lax tissue in the chin. This makes CoolSculpting the better option for patients who also want to correct their skin laxity.
Liposuction is a popular body sculpting procedure that involves dislodging and suctioning the fat cells in the treatment area using a cannula. But since it’s a surgical procedure, many patients are wary of the risks and long recovery periods that come with it. CoolSculpting is a much safer alternative that doesn’t involve long downtime or scarring.
Submental fullness is a common issue for many people. Although it’s usually associated with weight gain, this cosmetic concern is actually a result of many factors like lifestyle, genetics, and more. If you’re also concerned about the appearance of a double chin, then talk to our experts today about treatments.
Double chin is one of the many CoolSculpting treatment areas often requested here at NJ Center for CoolSculpting. Thanks to years of experience in the industry, you can trust our providers to deliver the best CoolSculpting result for you with every visit. Call us now for an appointment.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
Gaining weight inevitably comes with the appearance of noticeable fat bulges. Some people develop stubborn bulges on the abdomen, buttocks, or thighs. But there are those who also commonly struggle with excess fat in the upper arm area. Getting rid of extra pounds is one thing and it doesn’t always guarantee that you can lose arm fat. Specialized treatments such as CoolSculpting may be a better option for improving and contouring your upper arms.
So how can CoolSculpting work for arm fat reduction? Using a special CoolSculpting applicator, the provider essentially freezes the stubborn fat in the upper arms. The treated fat cells will eventually get metabolized and dispelled from the body, resulting in a visible reduction of the arm fat layer. Results are almost always permanent as long as you don’t significantly gain weight and maintain a proper diet and lifestyle.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
Love handles, round bellies, back fats, and thick thighs are some of the common problems that almost everyone deals with. However, the female population is believed to struggle a lot with losing weight and is constantly bothered by the appearance of embarrassing upper arm fat.
Having flabby arms makes it hard for women to confidently wear sleeveless tops and dresses. Genetics and hormones are some of the factors why females are more likely to carry upper arm fat. Another possible cause is that women tend to burn fewer calories than men which is why weight loss and arm fat reduction always seem to be a challenge.
Fortunately, advancements in cosmetic surgery have allowed for newer body contouring techniques to give you the solution you need for dealing with your upper arm fat. One of the best arm fat reduction treatments is CoolSculpting. It’s a minimally invasive procedure that can get rid of your unwanted fat deposits for good with no downtimes or risks of scarring and other adverse events.
CoolSculpting is a body contouring and fat reduction treatment that uses the principle of cryolipolysis or fat freezing. It was theorized that exposing fat cells to cold temperatures speeds up their necrosis or death and that adipose tissues are more vulnerable to cold than any other cells in the body. It was from this idea that the CoolSculpting technology was born.
In 2010, CoolSculpting was first approved for the treatment of love handles. Since then, it has been used for many other problem areas in the body, including bra fat, inner and outer thighs, flanks, buttocks, and chin. It’s also become an excellent alternative to liposuction for reducing unwanted arm fat.
CoolSculpting targets the subcutaneous fat in the upper arms which lies just beneath the skin. It freezes the fat cells until they’re destroyed and absorbed by the body. The procedure will trigger an inflammatory response that sends macrophages to the treated area, speeding up the elimination of the dead fat cells from the system. This results in significant fat reduction and noticeable improvement in the shape and size of your upper arms.
The company behind CoolSculpting, ZELTIQ has developed several applicators which can be used to target unwanted fat deposits in different parts of the body. When addressing upper arm fat, the best machine to use is the CoolAdvantage Petite. It’s been cleared by the US FDA specifically for the treatment of upper arm fat.
What makes CoolAdvantage Petite different from other applicators is that it’s designed to target smaller, hard-to-reach areas. The pockets of fat in the upper arms may be visible but they’re not easy to treat compared to areas with wider coverage, such as the abdomen and love handles.
This machine has a unique suction mechanism that pulls the fat tissue into a cup and delivers controlled cooling. Arm fat reduction with CoolAdvantage Petite may take about 35 minutes per side. Some providers may also opt to use the CoolSculpting Elite which is the latest model the manufacturer has to offer.
It features dual applicators with an improved cup that provides better fit and suction. They can treat twice the amount of body fat in one session, effectively cutting down the treatment time so you can quickly return to your normal activity. The FDA has cleared CoolSculpting Elite for treatment of double chin, thighs, abdomen, buttocks, flanks, bra fat, back fat, and upper arms.
The first step to any body contouring and fat reduction treatment is to have a consultation with your chosen provider. You should choose a certified CoolSculpting expert who has the proven expertise and training to administer safe and effective treatments. During the consultation, you should thoroughly discuss your medical history, current health, and desired goals.
Your provider will create a personalized CoolSculpting treatment plan that suits your needs. Here's what you can expect from your CoolSculpting procedure:
Studies show that CoolSculpting procedures can remove up to 25% of fat cells in the targeted area. It also provides significant changes in the visible fat layer which gives at least a 73% patient satisfaction rate that is higher compared to other fat reduction techniques.
Based on clinical trials that focus on treating the upper arms, CoolSculpting has also proven to be a promising effective treatment. In one study, 20 subjects received CoolSculpting on the upper arms for a period of 6 months. The majority of the patients reported favorable results with an average of 0.41 to 0.72 cm reduction in arm circumference.
In another study, 30 women had their upper arm fat removed using CoolSculpting technology. They received the treatment for 12 weeks and results showed that they had a reduction in subcutaneous fat in the upper arms. Ultrasound measurements presented an average of 3.2 mm decrease in total fat layer compared to their baseline numbers.
One of the main advantages of CoolSculpting over other fat reduction treatments is that it’s nonsurgical and minimizes the risks of serious complications and unwanted reactions. However, just like any aesthetic procedure, there are still some side effects that may happen after the treatment. Here are some of the expected side effects of a CoolSculpting session:
Most of these side effects can show up immediately after the procedure and can last for several days. As long as you’re working with an experienced CoolSculpting provider, the risk for adverse events is minimal. If, however, you notice abnormal hardening of fatty tissues or paradoxical adipose hyperplasia, make sure to inform your provider so you can get immediate treatment.
The process of excreting dead fat cells doesn’t happen overnight. You may see initial improvements within a month after your first CoolSculpting session. However, your body will continue to metabolize and flush out the treated fat cells over the course of 3 to 4 months after the procedure.
During that period, you can make lifestyle improvements, such as exercising more and improving your diet, to make sure you don’t gain new weight and enhance the effects of the procedure. The treated fat cells won’t return so you can expect your CoolSculpting results to be permanent.
A CoolSculpting treatment plan varies per person depending on their intended goals and the severity of their arm fat composition. Generally, arm fat reduction requires only 1 session but additional treatments may be provided if you want to see dramatic results. You should clearly discuss your needs and body contouring goals with your provider so they can prepare the appropriate number of treatments for you.
Some people devote themselves to arm workouts but still become unsuccessful in removing their flabby arms. If this is a problem that you also have, you should consider getting CoolSculpting. This popular body contouring treatment has been proven safe and effective for getting rid of unwanted arm fat and can help increase your confidence in your appearance.
NJ Center for CoolSculpting is a premier med spa that offers the latest CoolSculpting technology for arm contouring and body fat reduction. We have a team of highly-trained professionals who can provide you with customized treatments for your specific skin concerns. Contact us now to schedule a consultation or inquire more about our services.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
Losing weight can’t be done overnight. Even if you’ve successfully dropped a few numbers on the scale, you may still find yourself struggling with noticeable bulges on your stomach, arms, or thighs. In the past, plastic surgery seemed to be the only solution for removing unwanted fat bulges but it comes with certain risks and complications. If you’re looking for a nonsurgical fat reduction procedure, CoolSculpting is worth considering.
So is CoolSculpting a safe option for fat removal and body contouring? Yes, CoolSculpting procedures are generally a safe alternative for those looking to get rid of excess fat and improve their body shape. It’s a minimally-invasive treatment that uses cryolipolysis or fat freezing to permanently eliminate fat cells without any incisions. Studies that have been done on the treatment show that it has minimal side effects with very rare occurrences of adverse events.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
A lot of individuals are becoming more conscious about their health and appearance and are prioritizing their weight loss goals. From exercising more to eating healthier, they resort to different methods of reducing their weight. But sometimes, there are stubborn fat cells that aren’t responsive to simple workouts and diet changes.
Cosmetic surgery has long been established as the standard for body contouring and fat removal. However, advancements in medical aesthetic procedures have paved the way for CoolSculpting to become one of the sought-after treatments for banishing unwanted fat cells without going under the knife.
CoolSculpting uses cryolipolysis or fat freezing to target underlying subcutaneous fat. The treatment is based on the principle that fat cells are more susceptible to cold temperatures than any other cells in the body. Using different CoolSculpting applicators, providers can treat stubborn areas with unwanted fat with minimal risks and pain.
This revolutionary treatment has certainly garnered attention from both interested patients and aesthetic professionals. To solidify CoolSculpting’s safety and efficacy as a fat reduction and body contouring procedure, here are several studies about the treatment:
Any cosmetic procedure that aims to enhance the body requires approval from the US Food and Drug Administration. CoolSculpting received its initial FDA approval in 2010 when it was introduced as a treatment to reduce fat in the flanks or love handles. Another study in 2015 backs up the safety of CoolSculpting as a fat removal and body contouring procedure.
The report is essentially a summary of the FDA approval of Zeltiq’s CoolSculpting technology. Sixty subjects received CoolSculpting on the submental area at least once and were assessed for any side effects or adverse reactions. They were monitored immediately after receiving the procedure and on the following 6-week and 12-week follow-up visits.
The study showed that participants had no severe reactions to the CoolSculpting applicator or the treatment itself. Most side effects that showed within 1 week of the treatment were minimal and resolved on their own after a few days. Additionally, the trial presented a significant reduction in double chin fat among the Coolsculpting patients.
Another common complaint that CoolSculpting aims to address is the appearance of inner and outer thigh fat. In a 2015 study by A. Jay Burns MD and colleagues, they conducted a trial about the efficacy and safety of CoolSculpting for the thighs.
The study followed 45 individuals who wanted to reduce their inner thigh fat. A small flat cup vacuum applicator was used to treat the thigh fat which was difficult to reach with the standard CoolSculpting device. Each participant was subjected to a controlled cooling temperature for 60 minutes at their first CoolSculpting session. They had subsequent visits during the 8th and 16th week of the treatment.
After a series of CoolSculpting procedures, the researchers reported a significant reduction in the inner thigh contour. They also noticed improvements in their fat layer and overall thigh circumference. What’s also noteworthy is that each CoolSculpting patient experienced minimal side effects with no serious adverse events related to the procedure.
CoolSculpting is widely used to treat unwanted fat deposits in the flanks and abdomen. Another clinical trial showcased the safety and efficacy of the treatment for love handles and belly fat. Following 112 patients, the report concluded that there were no significant side effects after the treatments.
Among those who underwent a single CoolSculpting session, at least 14.3% of patients had a post-treatment reaction with zero participants having serious adverse events. Meanwhile, about 10.3% of subjects who received second treatments experienced some side effects which were short-lived.
Minimally invasive, convenient, and straightforward—these are some of the words that may be used to describe CoolSculpting. However, this shouldn’t be used as an alternative to weight loss strategies.
You can think of CoolSculpting as a supplementary treatment to your weight loss journey. This can help you get closer to your dream body once you’ve shed those excess pounds. The ideal candidates for CoolSculpting are those with at least an inch of pinchable body fat and are at least 10 to 15 pounds within their target weight. The treatment may not be as effective for those who are overweight or obese or are targeting to remove visceral fat.
Here’s an overview of what to expect from a CoolSculpting treatment:
Another advantage of CoolSculpting is that it has minimal downtime. Most patients who received the treatment can go home immediately or return to their normal activity after the procedure. However, you may expect some level of discomfort due to the side effects of the treatment. Here are some of the CoolSculpting side effects that you may experience:
Minor pain is common in the area that was treated with CoolSculpting. It’s more prevalent if a vacuum applicator was used as the skin was pulled into the cup. You’ll feel lingering pain for about 3 to 5 days after the CoolSculpting procedure, but this can be easily managed with some painkillers.
You may also feel some skin irritation or itching in the treated area after CoolSculpting. This is a common response to the procedure and is a good sign that the treatment is working. It usually means that the body’s inflammatory responses are working hard to excrete the dead fat cells. This may be accompanied by some degree of swelling, bruising, and redness which will go away within a few days.
Since the CoolSculpting device cools the adipose tissues, it’s common to experience intense cold which can lead to increased skin sensitivity and numbness. This side effect may persist for at least 1 to 2 weeks after the treatment.
As long as it’s performed by an experienced provider, CoolSculpting rarely causes adverse reactions or complications to the patient. However, there’s still a small possibility that it can cause an unwanted effect such as paradoxical adipose hyperplasia. Instead of eliminating fat, an abnormal, hardened overgrowth may appear on the treated area as an effect of cryolipolysis. Studies show that this has about a 0.00051% incidence among CoolSculpting patients.
Skin burns are most common in laser-assisted body sculpting and fat reduction techniques. However, unsupervised CoolSculpting sessions or unprepared treatment areas may also lead to potential freeze burns or frostbites. This side effect should be able to subside on its own with proper aftercare within a few weeks.
CoolSculpting may also trigger some vasovagal reactions, such as dizziness, fainting, lightheadedness, nausea, and sweating. This reaction is rare but it may happen as a result of lying down for a long period during the procedure. Poor preparation and lack of hydration before the treatment may also contribute to this adverse event.
You should only trust an experienced plastic surgeon or CoolSculpting provider for your fat reduction treatment. This lessens the risks of bad results or adverse events after the procedure. Here are some things you need to consider when searching for a CoolSculpting center:
If diet and exercise aren’t giving you the results that you want, CoolSculpting can help provide significant fat elimination to bring you closer to your body goals. As long as you choose the right provider, this fat reduction treatment is safe and has minimal side effects that you need to worry about.
At NJ Center for CoolSculpting, we have extensive experience and training in administering CoolSculpting treatments for body contouring. We’re knowledgeable in the best fat-freezing techniques to help you achieve the outcome that you want. Call us today to book a consultation or know more about this treatment.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
CoolSculpting is a non-invasive fat removal treatment method that eliminates stubborn fat cells on small areas of the body such as the arms, chin, and abdomen. What happens is that fat is frozen via a vacuum applicator. Frozen fat is then targeted and broken down to be removed, resulting in a slimmer and more defined figure.
So is it safe to try out CoolSculpting at home? CoolSculpting is a complicated process that shouldn’t be tried at home through DIY materials. Doing so will merely expose you to several health risks, and it may not be as effective as professional CoolSculpting treatments.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
CoolSculpting treatment is an effective and efficient way to eliminate each stubborn fat cell through the process of fat freezing, but not all people can afford it. So most people naturally prefer improvised fat freezer methods, which is based on the rationale behind this treatment.
For starters, CoolSculpting results in cryolipolysis, a reaction in which the death of fat cells is induced with cold temperatures using a precisely controlled cooling technology, resulting in fat freezing. After the application of controlled cool temperature into the area of targeted fat cells, the stubborn bulge will be suctioned using a hand CoolSculpting applicator.
So in CoolSculpting treatments, fat is dissolved using cold temperatures, but a hand CoolSculpting applicator keeps the area firm and pinned in place. The hand CoolSculpting applicator that suctions off the excess fat is important to keep the fat cells close to the superficial layers (i.e, subcutaneous fat cells) of the body so that the cold temperature can only affect it.
This treatment doesn’t just involve a single session, it can take multiple treatment sessions to produce the desired results, and each session can be expensive. Below are the reasons why CoolSculpting can be dangerous:
CoolSculpting at home doesn’t involve consistent temperatures. Ice is the most common tool used for this. Surely, you can’t maintain the temperature of ice for a period long enough to trigger body fat reduction results. At-home CoolSculpting improvisation also has no built-in safety mechanisms to protect your skin from unnecessary injuries.
Additionally, DIY cool sculpting doesn’t have a suction feature so how would it even work? Seek the services of professionals in CoolSculpting to ensure the safety and effectiveness of the CoolSculpting procedure.
DIY cool sculpting may easily be carried out using dry ice cubes or other frozen materials (e.g, frozen gel pads, freezer packs). The primary objective is to freeze body fat cells for fat reduction. However, professional CoolSculpting involves a special device that comprehensively freezes fat cells from within the skin. Ice cubes and other frozen materials, on the other hand, only freeze the skin.
Because DIY cool sculpting only freezes skin over the body fat cells instead of the fat cells themselves, it doesn’t really produce the desired results that one expects from CoolSculpting. Additionally, CoolSculpting at home may cause certain risks and side effects such as frostbite, numbness, pain, and even permanent tissue damage.
If you’re trying to save then you may simply try other cheaper non-invasive alternatives. Pushing your luck with DIY cool sculpting may double your expenses because you’d end up needing medical treatment to restore damaged tissues.
CoolSculpting isn’t covered by insurance, but there are now payment options that can offer you more flexibility so you can afford to have these treatments done by an experienced professional.
Seeking the services of an experienced CoolSculpting provider for a safe and effective freezing fat procedure is still the most optimal choice. Only these aesthetic professionals can provide you with the best results through their state-of-the-art equipment.
Aside from the fact that professionals offering CoolSculpting have the credentials to perform the treatment, they are also more equipped with sufficient safety precautions that are necessary in case the devices fail.
In summary, professional CoolSculpting is more effective, safe, and long-lasting. So if you’re thinking about the treatment being more costly than DIY, keep in mind that the end result and the safety is worth paying extra for the CoolSculpting cost.
While CoolSculpting at home may not be too bad for some, it certainly wouldn’t be as effective as professional CoolSculpting. Professional CoolSculpting equipment can produce consistent cool temperatures that DIY cool sculpting tools can’t. When an ice pack is applied to the skin, the temperature of the skin is absorbed by the ice pack.
This strengthens the fact that DIY cool sculpting has no effect because it doesn’t produce the desired effect when a cool temperature is applied. DIY cool sculpting merely freezes your skin whereas professional CoolSculpting freezes fat cells, eliminating them in the process.
Professional CoolSculpting treatment isn’t spared from risks and side effects, but these are normal, manageable, and typically go away in a few days. These health risks are nothing compared to what’s in store for you with DIY cool sculpting.
A professional CoolSculpting machine has safety options to produce consistent temperatures and settings that can easily be toggled as a fail-safe button. Furthermore, the treatment lasts for only 30 to 60 minutes with minimal downtime.
Professional CoolSculpting treatment is effective for an indefinite period of time. Depending on your lifestyle choices and how you maintain your slim physique, results can be long-lasting. Unwanted fat cells that are eliminated through this treatment are usually permanently eliminated once your body has fully metabolized these excess fats.
However, do take note that CoolSculpting isn’t a substitute for diet and exercise, it’s merely a treatment that can be applied to individuals who can’t be remediated with healthy lifestyle choices. So if you continue to eat excessively and maintain your unhealthy lifestyle, you can still develop unwanted body fat deposits even after this fat-freezing treatment.
Additionally, the number of treatment sessions required for CoolSculpting usually ranges from 2 to 3 sessions that are spaced 2 months apart.
CoolSculpting uses cold temperatures to freeze fat cells to death. These fat cells will then be metabolized by the body, and fully eliminated. So far, there are no prohibitions in terms of what can and can’t be combined with professional CoolSculpting. You can even combine other treatments such as Botox to eliminate your double chin if you want.
But if you’re wondering whether having a plastic surgery procedure can be combined with professional CoolSculpting, it would be best to consult that concern with your plastic surgeon. Additionally, body contouring procedures can also be combined with professional CoolSculpting treatment, such as:
The difference between CoolTone and EMSculpt is that CoolTone uses high-powered coil electromagnetic energy to induce magnetic muscle stimulation while EMSculpt uses high-intensity focused electromagnetic energy. Both CoolTone and EMSculpt are body contouring procedures that can further enhance the effects of CoolSculpting.
If you pass the criteria as a candidate for CoolSculpting treatments, do take note that you still need to check with your dermatologist or plastic surgeon whether this treatment option is the right fit for you.
Also keep in mind that CoolSculpting isn’t a substitute for exercise and a healthy lifestyle. This treatment option is only applicable for stubborn fat cells that couldn’t be eliminated through natural weight loss methods.
The results of CoolSculpting are as good as permanent as long as you maintain a healthy lifestyle through diet and regular exercise. However, there are post-treatment instructions that can be done to reduce any discomfort right after this fat-freezing treatment such as:
CoolSculpting at home doesn’t freeze the fat bulge and suck it away. DIY CoolSculpting hacks can only cause damage to your skin and surrounding tissue layers. If you really want to eliminate belly fat or any unwanted fat through this treatment, there are flexible payment options that can allow you to experience safe and effective CoolSculpting treatments.
NJ Center for CoolSculpting is a reliable medical spa that provides safe and non-invasive fat reduction solutions such as CoolSculpting. With our state-of-the-art CoolSculpting machine, we can assure you of a safe fat-freezing treatment to eliminate unwanted fat. You can know more about what we can do for efficient fat loss, and even after-treatment wound care by scheduling a consultation.
You can visit our clinic at Summit Avenue or contact us to get a free quote or ask about our CoolSculpting work.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
Weight loss isn’t an easy journey for most people – even after months of diet and exercise, many people still find stubborn fat in some parts of their bodies. Although a CoolSculpting treatment is safer than surgical body contouring treatments when eliminating unwanted fat cells, many people are still wary of the CoolSculpting risks they might experience.
So what are the typical side effects of CoolSculpting and how are they treated? A CoolSculpting procedure may cause common but mild complications like temporary pain and skin irritation at the treatment site. Paradoxical adipose hyperplasia is also a rare CoolSculpting risk, but it’s not life-threatening so many patients can still treat them with liposuction.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
With over 350,000 treatments performed every year, CoolSculpting is a popular body sculpting treatment that’s used as a minimally invasive alternative to liposuction. It uses fat-freezing technology to help patients get rid of unwanted subcutaneous fat in a process known as cryolipolysis.
What many CoolSculpting patients love about getting this cosmetic procedure is that it gets rid of bra fat and other visible fat bulges even in hard-to-reach areas. The intense cold from the CoolSculpting applicator freezes and kills the treated fat cells. The body eventually breaks down the dead fat cells and eliminates them through the liver. And for better fat removal results, consult with your provider about CoolSculpting Elite.
The dead fat cells won’t return to the treated area, but patients need to maintain a healthy lifestyle and stable weight to maintain their fat reduction results. Serious side effects and complications are highly unlikely as long as the provider follows the CoolSculpting safety guidelines.
But to better prepare CoolSculpting patients for their treatment, the provider should tell them about the following risks and side effects:
Pain in the treatment area is normal during the treatment session as the skin is pulled into the applicator. Most patients reported that the pain is tolerable and that the treatment area eventually becomes numb as the CoolSculpting starts to cool the skin and pinchable fat.
However, some patients may also endure this common side effect even after their CoolSculpting session. The pain they experience usually feels like stinging or aching sensations at the treatment site. It’s the result of the intense cold temperatures they experienced during the treatment.
The good news is that post-treatment pain usually only lasts for a few days even without taking pain relief medications. But if the pain bothers you or prevents you from moving comfortably, make sure to talk to the CoolSculpting provider immediately.
Temporary skin irritation is a common adverse reaction after a CoolSculpting treatment that usually resolves on its own. Like pain in the treatment site, the skin irritation that CoolSculpting patients may experience is also caused by the extreme cold temperatures from the applicator used in the treatment.
Temporary skin irritation may come in different forms, such as skin discoloration, swelling, skin sensitivity, and bruising. It usually goes away on its own after a few days, but make sure to seek medical help immediately if it persists or worsens. Avoid applying any treatment product on the treatment site unless the doctor said so to avoid complications.
Paradoxical adipose hyperplasia (PAH) is a rare but severe complication that about 0.0051% of patients experience after their CoolSculpting treatment. Instead of stubborn fat cells freezing and disintegrating, the fat may expand and harden in the treatment area. The enlarged area is often compared to a stick of butter since it resembles the shape of the CoolSculpting applicator.
Experts are still unsure why PAH happens to some patients, but it’s been found that more men experience this CoolSculpting side effect than women. Although PAH is more of a cosmetic concern than a physically dangerous complication, the hardened lump of fat in the treated area won’t go away on its own.
Since its appearance is a huge concern for most PAH patients, they look for different ways to safely get rid of the enlarged fat cells. However, only corrective liposuction and other surgical procedures are the recommended way to eliminate them. Additionally, patients have to wait for a few months before undergoing liposuction to minimize the risk of PAH recurring.
The duration of CoolSculpting complication depends on the specific side effect that the patient experiences. Common side effects like pain, skin irritation, bruising, swelling, redness, and skin sensitivity may last anywhere from a couple of hours up to a few days. These symptoms don’t usually need medication or intervention, but patients may ask their provider for instruction or a prescription for their discomfort.
On the other hand, serious complications like paradoxical adipose hyperplasia can take months to resolve. The enlarged fat cells may only develop around 2 to 3 months after the initial improvement of the treatment area. Even after the hardened lump of fat in the treatment area shows, patients still need to wait for a few months until they can undergo liposuction to remove it.
Common side effects of CoolSculpting like pain, skin sensitivity, bruising, and swelling don’t require additional treatments since they go away on their own after a few days. Many providers also advise their patients to avoid pain relievers like acetaminophen and ibuprofen since they can increase the risk of side effects.
But for the few patients who experience paradoxical adipose hyperplasia after their CoolSculpting treatment, here are the best procedures to try:
Laser liposuction is a minimally invasive fat loss and body sculpting treatment that uses paddle-like applicators to heat the fat cells underneath the skin. This procedure damages the membranes of the fat cells, killing them and allowing the body to flush them out.
What makes laser lipo a good treatment for paradoxical adipose hyperplasia is that it doesn’t carry the same risk of recurrence as corrective CoolSculpting treatment. The laser technology used in this treatment also allows the doctor to reach the stubborn fat cells in both the superficial and deeper layers of the skin. It also works for enlarged fat cells in the hard-to-reach areas of the body.
But the biggest downside to using laser liposuction for PAH is that it takes a bit of time for the final results to show. If the patient prefers to remove the hardened fat immediately, then this treatment method might not be for them
Liposuction is an invasive dermatological surgery that uses suction technology to remove fat from different areas of the body, such as the hips, thighs, abdomen, and more. During the procedure, the plastic surgeon creates an incision in the treatment area where a hollow tube (or cannula) is inserted. The doctor dislodges the fat cells first so it’s easier for the cannula to siphon the fat.
The best thing about traditional liposuction is that it provides permanent fat-reduction results to patients. There’s also a lower risk of PAH recurring, so it’s the most prescribed corrective procedure for the CoolSculpting complication.
But since liposuction is still a type of plastic surgery, it still comes with more risks than minimally invasive options. Patients also have to endure a long recovery time of a few weeks before they can move around comfortably.
Although most common side effects of CoolSculpting resolve on their own after a few days, patients still find them inconvenient as they finish everyday tasks. Luckily, there are a few ways they can ensure a safe CoolSculpting treatment and minimize the risks that come with it.
CoolSculpting is a popular body sculpting treatment for a good reason – the controlled cooling technology effectively eliminates stubborn fat in hard-to-reach areas without the need for plastic surgery. But like other cosmetic treatments, it also comes with certain side effects that patients need to be wary of.
NJ Center for CoolSculpting is the trusted center that provides the best fat reduction results for patients in New Jersey and other nearby areas. Thanks to our years of experience in the industry, we already mastered the best way to deliver exceptional results without having to worry about serious complications.
Call us today to book an appointment or know more about our CoolSculpting services.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
No matter how much you exercise or how many vegetables you incorporate into your diet, there is no argument that losing excess weight can be difficult. From double chins to love handles, stubborn pockets of fat just won’t seem to go away. But the good news is that CoolSculpting can safely remove this fat without surgery — it only breaks down the underlying fat cells.
So what are the features of a CoolSculpting machine? First, it has a fat-tightening applicator for contouring almost any part of your body. Second, there is a cooling feature to make sure that the device doesn’t damage your skin. Third, built-in safety features make it possible for no tissue manipulation and incisions to be involved. And lastly, but certainly the most attractive feature, the treatment should take about an hour and there are guaranteed results.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
One of the requirements of a successful CoolSculpting treatment is the usage of the proper applicator. With all the names and variations of CoolSculpting applicators, you might easily get confused. These come in different sizes to match different sized treatments and outcome desires: A big applicator is used for relatively larger and longer areas. The most commonly used applicator is the CoolCore Advantage which can sculpt perfect abs.
CoolSculpting freezes and kills fat cells using controlled cooling, down to -7 degrees Celsius, and has an engineered monitoring system. By attaching the applicator head to the targeted area, the device is able to gently and effectively target the fat cells without damaging the skin.
This procedure has been FDA-regulated since 2010 and is considered a very safe non-surgical fat reduction procedure. CoolSculpting systems come with built-in safety features that ensure that the skin itself is left unaffected. For example, if sensors detect that your skin is getting too cold, it will shut down the machine automatically. There is also no tissue manipulation nor incisions involved in the process.
During a CoolSculpting session, all you need to do is relax on an application bed for 30 to 60 minutes while the doctor does their medical magic. You can even listen to music, read a book, or scroll through your phone while waiting for the procedure to finish. Once the procedure itself is over, you will be given a 2- to 5-minute massage to enhance the fat-loss effects. Afterward, you can go back to your normal routine or to the office.
You’ve probably heard of beauty salons promising a quick fix for fat reduction or home devices marketed as a cheap alternative to professional CoolSculpting treatments. But here’s the cold truth about fat freeze copycat treatments: DIY CoolSculpting treatments only freeze your skin and don’t actually get rid of any fat cells. Fat reduction technology is dangerous in the wrong hands; it may cause serious, irreversible damage.
We do not recommend attempting CoolSculpting at home because first, the procedure only involves ice cubes or other frozen materials. As a result, your skin freezes, but your fat cells don’t. Meanwhile, home remedies may pose several health risks such as frostbite, pain, and permanent tissue damage. This is unlike the possible mild side effects of CoolSculpting which typically resolve within a few days.
CoolSculpting is performed by experienced practitioners – meaning less room for mistakes. If you attempt CoolSculpting at home, you might end up spending more money on medical treatments to reverse the negative effects.
You’re much safer under the care of professionals rather than someone inexperienced. And more often than not, CoolSculpting patients keep coming back for more areas to be treated.
When you look good, you feel good. Once you’re done with your treatment, you’ll come out of the clinic with natural-looking body contours – unlike other cosmetic enhancement procedures which give you “fake” or “plastic” results. Others might think that you go to the gym every day or have the strictest diet, but it’s just the magic of CoolsSculpting technology.
The promises of CoolSculpting might seem too good to be true, but millions can attest to its results. A CoolSculpting treatment accomplishes what diet and exercise cannot. Up to 25% of the fat cells in the treatment area will melt away – no dietary supplements, strict diets, or intense workouts are needed. However, you still have to be careful about your physical activity and nutrition in order to optimize results.
This is a non-invasive, painless, and easy cosmetic treatment that uses advanced cooling technology to reduce local fat cell pockets. You may also opt for CoolSculpting Elite, the updated version of the cosmetic procedure. It comes with new and improved applicators that better fit the body’s natural curves and contours, making treatments more comfortable and efficient.
This revolutionary fat-freezing treatment doesn’t require any downtime. You don’t have to take a day off from work nor do you need to dedicate a day for recovery. After your 30 to 60-minute session, you might feel a tugging and cooling sensation around the treated area, but these effects should subside relatively quickly.
If the problematic fatty area that you’re concerned about is “pinchable”, it can most probably be done with CoolSculpting. This cosmetic treatment has been FDA-cleared to freeze fat cells in different areas of the body:
At NJ Center of CoolSculpting, we guarantee that you’ll get results that last and results that you’ll love. Fat cells are gone for good. You’ll observe gradual improvements over the course of 2 to 3 months and watch as you see that stubborn area smoothen out. We can’t promise you that you’ll never want to keep looking in the mirror.
In 2010, the FDA approved the CoolSculpting machine of ZELTIQ Aesthetics Inc., a company in the United States. CoolSculpting was initially approved for the flanks, abdomen, and thighs due to its built-in safety features which include the prevention of over-cooling. Later on, CoolSculpting technology was proven to offer remarkable results for the arms, thighs, chest, and double chin, among others.
From muffin tops to persistent food bellies to love handles, CoolSculpting is a world-renowned solution for reducing fat layers. But, of course, behind any popular weight loss treatment, there should be science to back it up. So how does CoolSculpting work? It is based on the science of cryolipolysis – from the words “cryo” (extremely cold) and “lipolysis” (fat destruction).
Before anything else, an ice pack is applied to the area of concern to protect the skin. Next, the cryolipolysis process starts with the CoolSculpting applicator using cold temperature to freeze and then break down the layer of fat cells beneath the skin. Temperatures of the fat tissue should ideally reach -1 to -4 degrees Celsius. At the same time, the fatty bulge is vacuumed into the applicator to ensure contact with the cooling plates.
The cost of a CoolSculpting medical procedure is patient-dependent. One session, which means sculpting a particular body area, typically costs $2,000 to $4,000. The price varies depending on the size of your fat pocket, the number of treated areas, how fast you respond to treatment, and the total number of sessions. Doctors usually book 2 sessions minimum (6 to 8 weeks in between each session). Don’t forget about your insurance or discount promos.
The smaller the area, the lower the cost. Say, for instance, if you want to target belly fat, you will most likely need 4 treatment areas. But if you have a small pouch, you may need 2 areas per treatment. While a single session is enough for one area, some patients may need follow-up treatments for the best results. For an idea of the costs of a CoolSculpting session for each area of the body, look at this table:
| Body part | Average price per treatment |
| Arms | $650 per arm |
| Stomach | $1,500 |
| Thighs | $1,500 per outer thigh$750 per inner thigh |
CoolSculpting is ideal for patients who have “pinchable” or little-unwanted fat in their body. In other words, you should be looking for mild improvements and should not be obese. Cryolipolysis is not designed for major fat reduction; it cannot treat dense fat since this typically indicates fat is surrounding the organs, instead of underneath the skin. If this is the case for you, you might want to consider liposuction.
These are other indicators that you may be a good candidate for CoolSculpting:
You don’t have to struggle with those stubborn pockets of fat any longer. At NJ Center for CoolSculpting, each CoolSculpting procedure is specially customized for the patient, taking into consideration your lifestyle, health, and aesthetic goals — we’ll make sure to provide you with a relaxing and safe experience. Get started with us and book a consultation today.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
Pinchable fat has been one of the most common cosmetic concerns many patients have. Even with a rigid diet plan and exercise routine, getting rid of these flabs has left many frustrated, if not helpless, in reaching their body goals. That’s why when people learn about CoolSculpting, a noninvasive procedure removing excess fat without plastic surgery, many may wonder if it actually works, especially with its claims of having minimal downtime and health risks.
So does CoolSculpting actually work? CoolSculpting has produced positive results in removing localized fat in numerous clinical trials. It has been a reliable fat reduction treatment, leaving many patients satisfied with its effects. This body contouring solution can get rid of around 20 to 80% of fat in the treated area after 2 to 3 treatments. But this procedure isn’t a weight loss option because it doesn’t significantly reduce your weight.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
CoolSculpting is an FDA-approved noninvasive procedure for removing pinchable fat by freezing the fat cells. This body contouring treatment doesn’t require lengthy downtimes and leaves health risks, unlike plastic surgery. It doesn’t create incisions nor give patients general anesthesia. Some may think of it as a convenient solution to losing excess fat, but they also wonder if it’s effective.
CoolSculpting is a reliable procedure for removing pinchable subcutaneous fat, or fat that is difficult to get rid of, even with regular exercise and a balanced diet. A single treatment of this body contouring solution can remove around 20 to 25% of fat, noticeable after 2 months. Patients usually need 2 to 3 sessions for better results and 20 to 80% reduction. It can target pockets of fat in the:
CoolSculpting has also earned a high satisfaction rate. A survey of 518 patients reported that 73% are happy with the results of the procedure and 82% would recommend it to their friends. But it’s important to note that the results of CoolSculpting may vary per patient, and it still relies on your metabolism for removing excess fat.
This treatment is best for those who are near their body weight but with stubborn fat in several areas. You might want to consult a reliable medical spa to provide a customized treatment plan to help you achieve your body goals.
CoolSculpting is a reliable treatment option for removing diet-resistant fat, but it’s not a weight loss option. This procedure won’t significantly reduce your weight and can take only around 2 to 5 pounds off your weight per session. Much less, this fat reduction method isn’t a solution for improving your health. Weight loss and good health still rely on physical activity and overall lifestyle intervention.
What CoolSculpting can do to achieve your goal weight is to set you up for success in having a healthy and active lifestyle, promoting weight loss. Many patients with regular exercise and a healthy diet sometimes get frustrated with the pinchable fat in their bodies. Getting rid of them with CoolSculpting helps keep you inspired in maintaining and improving your figure.
A good number of clinical trials have revealed positive results on the effectiveness of CoolSculpting or cryolipolysis technology. A clinical study in 2015 examined the efficacy of cryolipolysis for targeting fat in the inner thighs and arms of 20 women, where 17 were able to complete the trial. Results showed that the average circumference of the participant’s treatment areas has reduced by 0.41 cm after 3 months and 0.72 cm after 6 months, with p = 0.017.
A study published in 2017 examined the effects of this fat reduction method on the lower abdominal area of 15 women aged 25 to 50, following up after 2 months of having the treatment. The results revealed a reduction in perimeter and ultrasonography of about 0.03, with p < 0.03, showing a significant improvement in body contouring on the lower body mass.
Another study has reviewed 19 studies on cryolipolysis, where the procedure has been revealed to promote fat reduction by an average of 14.67% to 28.5%, measured by a caliper. Ultrasound results showed an average reduction of 10.3% to 25.5%.
CoolSculpting may produce noticeable results in removing excess fat from targeted areas, especially after multiple treatments. Some before and after pictures have shown these changes:
Source: CoolSculpting Center of New Jersey
Source: CoolSculpting Center of New Jersey
CoolSculpting is a reliable treatment for helping you achieve your body goals as it removes stubborn fat in targeted areas. NJ Center for CoolSculpting is one of the most reliable medical spas for providing this procedure, conducted by board-certified professionals.
CoolSculpting promotes fat reduction with its sophisticated technology. To determine if it works, you may want to know about its method of action, how long it lasts, and the treatment procedure. You should also know what to expect after each session.
CoolSculpting works by freezing the fat cells to trigger cell death without affecting nearby tissues. These fat cells will then break down and get flushed out by your metabolism. The excess fat this procedure targets are those lying on top of the muscle, called subcutaneous fat.
Fat cells targeted by CoolSculpting remain eliminated for good. This means that the fat removed from your body will no longer return, promoting permanent results. But it’s important to note that the targeted area can still develop excess fat from new fat cells. This event happens if you continue having a sedentary lifestyle and unhealthy diet.
CoolSculpting is a body contouring procedure that doesn’t require incisions or general anesthesia. The treatment session only lasts from 35 minutes to an hour, depending on the treatment area needed to target. Your procedure might go as follows:
Many patients report experiencing minor discomfort from the CoolSculpting applicator. The sensation is said to be similar to a mild stinging, aching, or tugging, while some mentioned a numbing feeling. The massage right after the treatment might cause minimal pain, but the procedure is tolerable.
CoolSculpting might be a nonsurgical procedure, but you can still expect mild side effects. These adverse events are the body’s normal reaction to the treatment, as it stimulates your immune system to react to the cryolipolysis and flush out the dead fat cells. Some side effects to expect are:
These side effects are self-limiting and may subside within 3 to 5 days and will completely resolve after a few weeks. You may consult your practitioner on the proper ways to ease discomfort. Should these adverse reactions persist, call your healthcare provider immediately.
CoolSculpting requires a short downtime only, and patients can usually resume their daily activities, except for a few restrictions. Even with noninvasive procedures, following aftercare steps is still necessary for ensuring successful results of your treatment. These instructions include:
CoolSculpting is worth it if it suits your lifestyle and aligns with your aesthetic goals. Patients needing to remove localized fat and are looking for or starting a healthier lifestyle to achieve their body goals are the most suitable for this procedure. This procedure is a good start in keeping them motivated to maintain their goal weight and ideal body.
But if you’re considering having this treatment, even without a fitness plan yet, you may consult a reliable practitioner to guide you through maintaining the results of your CoolSculpting treatment.
CoolSculpting is an FDA-approved nonsurgical treatment that removes excess fat in targeted areas by freezing the fat cells and allowing the body to flush them naturally. CoolSculpting has gained positive results in numerous clinical trials and left many patients satisfied with its effects. But it’s not a weight loss solution, so you may want to consult with a reliable professional to know how the treatment can help achieve your ideal body.
NJ Center for CoolSculpting is one of the best medical spas for conducting CoolSculpting procedures, with highly-trained professionals performing these treatments with advanced tools and techniques. You may also expect customized treatment options to set you up for success in achieving your ideal body. Get started on your journey towards achieving a slimmer and more contoured body and book an appointment with us today.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
With more advanced technologies in the cosmetic dermatology industry, it’s not surprising for minimally invasive fat reduction and body contouring treatments to become popular alternatives to liposuction. And while a CoolSculpting session might be what you need to get rid of excess fat, some people are worried about the possible appearance of lumps and if they ever go away.
So how long does it take for the lumps to disappear after a CoolSculpting treatment? Like other common side effects, it might take a few weeks for the lumps to go away on their own after a CoolSculpting procedure. But if the lumps persist or become painful, it’s best to consult a doctor immediately because it might be a sign of a rare complication called paradoxical adipose hyperplasia (PAH).
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
CoolSculpting is a revolutionary body sculpting treatment that uses fat freezing technology to get rid of unwanted fat cells in the treatment area. The procedure only affects subcutaneous fat because the CoolSculpting applicator doesn’t reach deep enough to get rid of visceral fat. It’s also a popular alternative to a liposuction procedure with over 8 million treatments performed worldwide.
Although CoolSculpting is a safe procedure recommended for almost anyone with stubborn fat deposits, it still comes with certain risks and possible side effects that patients should know. Pain and temporary skin irritation may occur in the treated area, but they usually subside after a few days or weeks. Some CoolSculpting patients may also notice a lump on their skin before the full CoolSculpting results show.
Yes, some hard lumps may form underneath the skin a few weeks after the minimally invasive cosmetic procedure because of the way it eliminates unwanted body fat. The correct medical term for this is “cold panniculitis” which happens when there’s an inflammation of the treatment area caused by extremely cold temperatures or fat freezing treatments.
The cold panniculitis or small lumps that form after a CoolSculpting treatment are different from liposuction lumps. The bumps after a CoolSculpting treatment develop because of cold temperatures while lipo lumps appear because of the tunnels created underneath the skin as the cannula is used.
A CoolSculpting patient may develop cold panniculitis because of the treatment’s effects, but the dead fat cells eventually disappear in the treated areas as the inflammation subsides. These lumps may also feel stiff and uncomfortable but they eventually go away.
The small lumps that appear on the inner thigh, stomach, arm, or other treatment areas eventually disappear on their own after a few weeks. They’re a common side effect of CoolSculpting that patients should be aware of and they usually bring discomfort to patients. If the lumps are still visible on the skin several weeks after the treatment, then the patient should inform their doctor about the symptom immediately.
Although the appearance of small lumps is a common side effect that goes away on its own even without medical intervention, it’s still an uncomfortable symptom that some CoolSculpting patients want to eliminate as soon as possible.
Gently massaging the treatment areas helps with the resolution of the small lumps because it improves blood circulation and lymphatic drainage. The plastic surgeon or doctor may also recommend wearing a compression garment for a few weeks following the fat loss treatment to avoid the formation of small bumps on the skin.
The appearance of small lumps after the minimally invasive fat removal procedure shouldn’t be a cause for alarm for most people, but patients should still monitor the treated area in case the symptoms worsen or persist. If the discomfort from the lumps becomes unbearable, you may consult a doctor about taking painkillers or other ways to relieve pain.
On the other hand, the prolonged appearance of lumps may also be a sign of paradoxical adipose hyperplasia, a rare side effect of CoolSculpting that causes the treated area to bulge and feel stiff. This condition can be treated with different procedures, but patients have to consult a medical professional first.
CoolSculpting is a helpful fat removal treatment for patients who want to get rid of localized fat pockets without going through plastic surgery. However, it’s crucial to remember that it’s a treatment for simply eliminating fat so it might not help much for weight loss. Patients should make sure that they’re the right candidate for this kind of treatment so they can avoid or minimize unwanted side effects like pain, aching, temporary skin irritation, and more.
Although this treatment is safe for the most part, some patients are still worried about the possibility of developing the “stick of butter” side effect of CoolSculpting and other cryolipolysis procedures.
Paradoxical adipose hyperplasia (PAH) is a rare complication associated with CoolSculpting that got its name from the unexpected overgrowth of fatty tissues in the treated area. In some cases, it may take about 8 to 24 weeks for the PAH to appear in the form of a hardened and visibly enlarged treatment area.
CoolSculpting uses a fat freezing technology that chills the tissue to the point that the unwanted fat cells in the area crystallize and disintegrate. But in the case of PAH, these fat cells grow bigger and firmer than before. The resulting side effect looks like a “stick of butter” that takes after the shape of the CoolSculpting applicator.
This side effect is considered rare, but there isn’t a firm statistic about it yet. A study published by JAMA Dermatology in 2014 shows that the side effect has a 0.0051% incidence rate or about 1 out of 20,000 treated patients. On the other hand, the manufacturer data shows that the incidence rate of PAH is slightly higher at 1 out of 4,000 treated patients (0.025%).
Another study in 2018 shows that PAH might be more common than initially thought at a 0.72% incidence rate. However, this study is only based on a small sample size of 11 patients.
Although PAH is more of a cosmetic concern than a physically dangerous complication, many patients still want to get rid of it. Unfortunately, PAH won’t go away on its own so patients need to try either of the following treatment methods:
Paradoxical adipose hyperplasia is fully treatable with liposuction, but patients need to wait for about 6 to 9 months first before the surgical procedure. Waiting is crucial because it allows the hardened fat to soften enough for safe removal. If the patient receives a liposuction treatment immediately after the PAH develops, there’s a huge risk that the PAH might only recur.
Liposuction is a surgical fat removal procedure that involves using a cannula to extract the fat cells from the treatment area. The fat tissues are broken up first before they’re vacuumed out of the body, effectively reversing the effects of PAH.
But like other plastic surgery procedures, patients need to wait for a few weeks until the treated area is fully healed after the liposuction treatment. It may also take them several days to feel comfortable enough to perform normal activities at home.
Laser-assisted liposuction is another effective way to get rid of the hardened fat deposits after a CoolSculpting treatment. It’s less invasive than surgical liposuction, so it’s the preferred alternative for some PAH patients. With this method, the dense fat deposits are heated and liquified first before they’re suctioned out of the body.
During the treatment, the plastic surgeon creates a small incision on the treatment area where the laser is inserted and placed underneath the skin. The heat from the laser ruptures and liquefies the fat cells so they’re easier to remove. As the fat turns soft and liquid, the doctor then uses a cannula to suction the fat out of the treatment area.
Since this procedure is minimally invasive, the tissues around the treatment sites won’t be as damaged as they would be in surgical liposuction. There’s also less likelihood of swelling or bruising after the treatment.
Even with safe and minimally invasive treatments like CoolSculpting, there are still some downtime and side effects that patients would like to avoid. To minimize these risks and speed up healing after your treatment, here are some tips to help maximize your recovery:
The appearance of lumps is a normal side effect of CoolSculpting, but patients should still consult with a healthcare professional if it worsens or persists. Paradoxical adipose hyperplasia is a rare side effect of this procedure, but finding a trusted provider can help you avoid this kind of complication.
At NJ Center for CoolSculpting, we always ensure our patient’s safety to help minimize their risk of developing small lumps, PAH, and other CoolSculpting side effects. Book a consultation with us today to know more about CoolSculpting and what it can do for you.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
CoolSculpting is a popular body contouring and fat reduction treatment that gives patients the body shape they want even without plastic surgery. Although the procedure is relatively simple, it’s still important for people to know every important detail about the treatment so they can be prepared for its risks and possible outcomes.
So how long should the CoolSculpting applicator stay in the treatment area to eliminate unwanted fat cells? The time needed for each CoolSculpting session varies depending on the specific treatment area, but most of them only take about an hour to complete. CoolSculpting is safe enough that leaving the cooling plate for too long won’t cause serious side effects, but it won’t have additional benefits either.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
With over 8 million treatments performed worldwide, CoolSculpting is a great alternative to cosmetic surgery when it comes to removing fat bulges that can’t be eliminated with a healthy diet and regular exercise. CoolSculpting results are permanent, as long as patients maintain a healthy lifestyle and don’t experience sudden weight changes.
Since CoolSculpting doesn’t require surgery, providers only use controlled cooling plates to freeze and destroy the subcutaneous fat in the upper arm, thigh, stomach, double chin, and other body parts. Each treatment session usually takes around 35 to 60 minutes to work and patients can return home on the same day.
A CoolSculpting procedure is based on a fat-freezing mechanism known as cryolipolysis. This refers to the use of cellular response to cold that breaks down the fatty tissue in the problem areas. What’s great about this minimally invasive body sculpting treatment is that it gets rid of the stubborn fat in the area without affecting the surrounding tissue, muscle, or nerve.
CoolSculpting patients usually require multiple treatment sessions to achieve the best results. During each session, a CoolSculpting applicator is put on the skin’s surface to suction the pinchable fat in the inner thighs, abdomen, arms, or other treatment areas. These applicators have cooling plates that slowly decrease the temperature to destroy the fat cells.
After the procedure, the dead fat cells are sent to the body’s lymphatic system where they’re filtered out as waste over the next few weeks. CoolSculpting results are permanent since the removed fat cells won’t return there. However, new fat cells may still form in the treated areas, so patients should maintain a healthy lifestyle and stable weight.
CoolSculpting is a revolutionary cosmetic treatment that eliminates excess fat in almost every body part. Each CoolSculpting session takes around 30 to 60 minutes, depending on the size of the treatment area.
Most patients need multiple treatment sessions to achieve the best results for their bodies. But note that it’s also possible to “overtreat” an area, resulting in a dent that looks disproportionate to its surrounding areas. To find out how many treatment sessions are needed to reach your body goals, make sure to consult an experienced CoolSculpting provider.
| Treatment Area | CoolSculpting Duration | Recommended Number of Treatment Sessions |
| Flanks or love handles | About 35 minutes | Up to 3 sessions |
| Stomach or abdomen | Between 35 to 60 minutes | Up to 2 sessions |
| Inner thigh | About 35 minutes | 1 session |
| Outer thigh | About 35 minutes | 1 session |
| Submental area (double chin) | About 45 minutes | Up to 2 sessions |
CoolSculpting Elite and regular CoolSculpting applicators are designed to avoid damaging the treatment areas in case the cooling plates are left for too long, but there is no information about what might happen if this is the case. Additional CoolSculpting duration also won’t have additional benefits for the body, so it’s best to just follow the recommended treatment time.
An experienced plastic surgeon or provider stays with the patient throughout the process to ensure that they’re comfortable at all times. They also assess how many treatment sessions are needed to achieve the best results without overtreating the patient and causing a dent to appear on their skin.
Like other cosmetic procedures, CoolSculpting also comes with certain risks and side effects that patients should be aware of. Most of the common side effects are mild so they go away on their own, but patients should still contact a healthcare professional if they worsen or persist.
Before trying CoolSculpting treatments, patients must make sure that they’re a good candidate for this type of fat reduction procedure first. Patients who are pregnant and those who are sensitive to cold temperatures should skip this treatment to avoid serious complications and side effects.
It’s also important to remember that CoolSculpting shouldn’t be treated as a weight loss treatment – patients only seem like they lost a lot of weight because of their improved figure.
What many patients love about CoolSculpting is that it offers minimal discomfort and recovery time. But some side effects may still occur, such as:
Tugging or pulling sensations are commonly felt by patients during the CoolSculpting treatment. They happen in the treatment area where the skin is placed between the cooling plates as the fat cells are frozen. According to most patients, these pulling sensations are tolerable enough to endure for a few minutes before the skin feels numb.
Since CoolSculpting uses extremely cold temperatures to destroy the subcutaneous fat, it’s normal for some patients to feel a tingling or stinging feeling in the treatment area. This is the body’s normal response to cold and they usually subside after a few hours, days, or weeks.
Swelling, bruising, and redness in the treated areas are also normal after a CoolSculpting session. They usually go away on their own after a few days, but some aftercare tips can help soothe the discomfort they bring. The provider may recommend taking pain relief medications, so make sure to only take them as directed.
Although serious side effects are extremely rare for CoolSculpting, they can still happen to a small portion of treated patients. Here are some of them:
CoolSculpting works by freezing the fat cells and letting the body flush them out naturally. But in some rare cases, the fat cells develop thicker and firmer walls resulting in the appearance of a stiff bulge in the treated areas. This condition is known as paradoxical adipose hyperplasia (PAH) and it usually looks like a “stick of butter” because it mimics the shape of the CoolSculpting applicator.
PAH is an extremely rare side effect of CoolSculpting that has an incidence rate of 0.0051%. The good news is that it’s more of a cosmetic dermatology concern instead of a medical one, so it’s not life-threatening. However, many people find its appearance unpleasant so they get it treated immediately using surgical or laser-assisted liposuction.
Subcutaneous induration is the appearance of generalized hardness or discrete nodules around the treated area. It usually develops because of poor lymphatic drainage after the treatment session. It’s also accompanied by pain and discomfort, so the provider may recommend taking pain medications to relieve pain and reduce inflammation. This side effect usually takes a couple of weeks to go away.
Fortunately, most side effects of CoolSculpting go away on their own without the need for medications or medical intervention. They take a few days or weeks to subside and it’s crucial to let the treated areas fully heal first before the next CoolSculpting session.
For the few patients that develop PAH after their CoolSculpting treatment, they can consult a plastic surgeon about surgical or laser-assisted liposuction to reverse its symptoms. But before treating PAH, patients have to wait about 6 to 9 months first to let the stiff fat deposits soften. Skipping this waiting period might only increase the chance of PAH recurring.
CoolSculpting treatments are safe and convenient, so even first-time patients don’t need extensive preparation for their appointment. But to minimize the risk of side effects and complications, it’s important to read about the treatment so you know what to expect. Doing this also allows you to find the best provider to perform the treatment for you.
On the day of the appointment, make sure to wear comfortable and loose clothing. Patients have different treatment times based on the size and number of treatment areas. During the procedure, patients may sleep, read, or just relax. After the procedure, the provider massages the treated areas to increase blood flow, break down the excess fat cells, and improve the fat reduction results.
Patients may also return home on the same day since the treatment doesn’t require a long downtime. They should also follow the provider’s aftercare tips to minimize the risk of serious complications and ensure the best results.
CoolSculpting is a safe, effective, and quick fat reduction procedure that uses cooling plates to destroy the fat cells in the treatment areas. The devices used for this treatment are designed to protect the skin and body from the adverse effects of extreme cold, so there won’t be much problem even if the applicator is left too long on the skin.
But at NJ Center for CoolSculpting, all of our staff are attentive to each patient’s needs, and we’ll make sure that the device only stays on your skin as required. We’re the trusted center for fat-freezing treatments, and you can rely on us to give you what you need for your specific concerns. Call us now to book an appointment.
Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!
