The Complete Guide to CoolSculpting Cycles

Everything You Need To Know About Repeating CoolSculpting Treatments For Optimal Fat Reduction

Coolsculpting cycles refer to repeating the fat-freezing treatment over multiple sessions. Getting several coolsculpting treatments spaced apart allows your body time to naturally eliminate the frozen fat cells for gradual, natural-looking fat reduction.

Slimming down without sweating? It's possible with CoolSculpting. This revolutionary fat-freezing treatment uses controlled cooling to eliminate stubborn bulge spots that diet and exercise fail to fix. While one session delivers noticeable results, many patients opt for multiple cycles to further sculpt their body over time. 

This comprehensive guide will uncover everything you need to know about repeat CoolSculpting treatments - from what to expect during and between sessions to determining how many cycles are ideal for you. Get the facts on why this non-invasive approach is growing in popularity and how repeating the freeze-and-shrink process can help you finally achieve your body goals. 

With the inside scoop on optimal treatment scheduling, you'll be chillin' in your slimmest shape yet.

Discover how this revolutionary fat-freezing technology can eliminate your stubborn bulges for good - schedule a free CoolSculpting consultation at NJ Center today.

Freeze Away Your Sctubborn Fat Like Never Before

Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!

CONTACT US

An Introduction to CoolSculpting

CoolSculpting is a non-invasive procedure that uses controlled cooling to reduce stubborn fat. It was cleared by the FDA in 2010 for fat reduction in the flanks and abdomen, but is now widely used for other areas including the thighs, back, arms, chin, and chest.

Here’s a quick overview of how CoolSculpting works:

Cryolipolysis Technology	The procedure employs cryolipolysis, which involves cooling fat cells to a temperature that triggers their natural death (apoptosis) without damaging surrounding tissues. This is because fat cells are more sensitive to cold than other types of cells.
Process of Fat Cell Elimination	After the fat cells are crystallized, they undergo phagocytosis, where the immune system gradually eliminates them over a period of 2-4 months following treatment.
Effectiveness	Each treatment can reduce the number of fat cells in the targeted area by approximately 20-25%.

Patients can start to see results as early as 3 weeks after CoolSculpting, with continuing improvements over 2-4 months. Results are long-lasting as the treated fat cells are eliminated for good.

What is a CoolSculpting Cycle?

A single CoolSculpting treatment session is considered one cycle. The typical duration of a cycle is about 35 to 75 minutes depending on the applicator used and the area being treated. 

During a cycle:

• A gel pad is applied to the treatment area to protect the skin
• The applicator vacuum adheres to the treatment area
• Patients will feel an intense cold sensation as the cooling plates target the underlying fat cells

Most patients tolerate the CoolSculpting process well, describing the sensation as aching or stinging cold rather than painful, as the initial cold dissipates within 5-10 minutes.

With recent advancements, some practices can now treat multiple areas of the body simultaneously in a single CoolSculpting cycle using larger applicators. However, it still requires multiple cycles to fully treat larger or multiple areas of the body.

How Many CoolSculpting Cycles Are Needed?

The number of CoolSculpting treatment cycles needed to achieve desired results can vary extensively based on a number of factors:

• Body Area Being Treated: Smaller areas like the chin or upper arms may only require 1-2 cycles, while larger areas such as the abdomen or flanks commonly need 2-4 cycles.
• Amount of Fat to be Reduced: Patients with minimal fat deposits may see satisfactory reduction with 1-2 cycles, while those looking for more dramatic fat reduction may undergo 6+ cycles over a period of months.
• Physiology and Metabolism: Results can vary from one person to the next based on circulation and individual metabolism that impacts how quickly the body eliminates the frozen fat cells.
• Treatment Approach: Some patients prefer a gradual approach with cycles spaced out over weeks or months, while others undergo multiple cycles in one day to speed up the fat elimination process.

On average, here is the typical number of CoolSculpting cycles needed to treat common body areas:

Body Area	Typical Number of  Cycles
Abdomen	2-4 cycles
Flanks “Love Handles”	2-4 cycles
Back Fat	4-6 cycles
Inner and Outer Thighs	4-6 cycles
Upper Arms	1-2 cycles
Double Chin	1-2 cycles

Spreading out cycles allows the body time to naturally eliminate fat cells between treatments. While some complete all cycles for an area within one week, monthly spacing such as 2 cycles per area every 4 weeks is also very common.

Get an accurate recommendation for your ideal number of treatments when you book a complimentary CoolSculpting assessment at NJ Center.

What to Expect During a CoolSculpting Cycle

Here’s an overview of what to expect before, during, and after each CoolSculpting cycle:

Before the Treatment

Patients should arrive with clean, dry skin shaved or trimmed in the treatment area. The provider will review your treatment plan, have you relax in a reclined position, and apply a gel pad to protect the skin.

During the Procedure

You may feel suction and pressure as the applicator is applied and adhered to the treatment site. As the cooling begins, you will feel an intense cold that can cause stinging, aching or cramping which subsides after 5-10 minutes as the area becomes numb. Our provider will monitor the cycle and adjust settings as needed based on your feedback.

Immediately After

The suction applicator is removed, and the provider will massage the treated area. Temporary side effects like redness, numbness, and mild bruising may occur. You can resume normal activities immediately with some residual tingling in the treated area.

Post-Treatment Protocol

It’s common for the treated area to remain swollen and tender to the touch for several weeks following the cycle as the fat cells are cleared away. Results become visible at around the 3 to 6 week mark.

What Does CoolSculpting Cycling Cost?

The cost of CoolSculpting cycles can vary based on several factors:

• Geographic location: The cost of CoolSculpting tends to be higher in major metropolitan areas compared to smaller cities or rural areas.
• Provider: Prices may differ between medical spas, dermatologists, and plastic surgeons offering CoolSculpting services.
• Treatment areas: The cost per cycle can depend on the size of the area being treated, with larger areas like the abdomen typically costing more than smaller areas like the chin.

Average Cost per Cycle

On average, each CoolSculpting cycle ranges from $750 to $1500+ per hour of treatment.

Discounted Packages

Many practices offer discounted CoolSculpting packages when multiple cycles are scheduled upfront. For a series of 3-6 cycles, costs often range from $3000 to $9000 overall, depending on the size and number of areas treated.

Insurance Coverage

Standard health insurance plans still classify CoolSculpting as an elective cosmetic procedure and do not cover treatment costs. However, some medical flexible spending accounts (FSAs) may reimburse CoolSculpting to a certain extent if it is prescribed by a physician for treatment of a legitimate medical condition like enlarged fat deposits. Patients should check with their FSA administrator for specific coverage details.

How CoolSculpting Compares to Other Fat Reduction Methods

CoolSculpting is not the only option for reducing stubborn pockets of fat, so it's helpful to understand how it compares:

Method	Invasiveness	Recovery Time	Typical # of Treatments	Typical Results
CoolSculpting	Non-invasive applicator device used to gently vacuum and cool target fat bulges	No downtime, can resume normal activities immediately	2-4 cycles spaced several weeks apart	Each cycle reduces treated fat bulge by 20-25% through gradual elimination of frozen fat cells
Liposuction	Invasive surgical procedure under general anesthesia	2-4 weeks of downtime with moderate activity restrictions during recovery	1-2 treatments several months apart	Can remove larger volumes of fat more aggressively, reshaping body contours in fewer sessions
Laser Lipolysis	Minimally invasive laser fiber inserted through small incision under local anesthesia	Around 1 week recovery with light activity restrictions	1-2 treatments several months apart	Less dramatic fat removal than liposuction, better for smaller treatment areas
Other Fat Freezing	Non-invasive applicator devices similar to CoolSculpting	No downtime, resume normal activity immediately	Typically more cycles than CoolSculpting needed	Comparable subtle, gradual fat reduction as CoolSculpting over multiple treatments
Body Sculpting	Non-invasive applicator devices use heat, ultrasound or radiofrequency	No downtime, normal activities can be resumed right away	6-8 treatments every 2-4 weeks	Modest fat loss over treatment period, not as dramatic per session as other options

For non-surgical body contouring and fat reduction, CoolSculpting delivers excellent long-term results comparably with just a few office treatment cycles and no required recovery period.

Experience optimal, long-lasting fat reduction without surgery or downtime - schedule your first CoolSculpting session at NJ Center now.

Get Your Customized CoolSculpting Plan Today!

Whether you want to tackle that stubborn belly bulge or slim sculpted arms, CoolSculpting offers a non-invasive way to reduce fat without surgery, needles, or downtime. While one round produces subtle results, tailored multi-cycle treatments lead to optimal, natural-looking fat reduction over time. 

Ready to ditch your diet-resistant fat for good? 

The experts at NJ Center for CoolSculpting can customize an effective plan targeting your trouble spots. Book a free consultation to determine your ideal number of cycles and get started on revealing a slimmer, more sculpted you. 

Reduce fat the cool way - call today to schedule your CoolSculpting transformation.

Freeze Away Your Stubborn Fat Like Never Before

Up to 25% Fat Reduction With CoolSculpting: Treat Yourself Today!

CALL NOW